Wiring

dymeone

CarAudio.com Newbie
Basically i have a problem with my wiring, not sure if theres a short somewhere or what, hooked up my fuze to the battery(disconnected) reconnected the battery tried starting the radio and car and it didn’t start, took one side of the wire off the fuze and it started, last time i had help wiring this sub to my other car, but im doing it myself this time, anything im doing wrong? yes the amp is grounded
 
6B19CFB4-87A3-4787-AEB6-38976C417B96.png
This question could have many answers.
Is the battery good?
Did the vehicle start and run before?
Is the fuse inline on the dedicated power supply to the amp?
Where is your ground?
How is it grounded?
 
View attachment 48692This question could have many answers.
Is the battery good?
Did the vehicle start and run before?
Is the fuse inline on the dedicated power supply to the amp?
Where is your ground?
How is it grounded?

View attachment 48692This question could have many answers.
Is the battery good?
Did the vehicle start and run before?
Is the fuse inline on the dedicated power supply to the amp?
Where is your ground?
How is it grounded?
battery is fine, started right up when i took the power cable out of the fuze which is weird not sure if i have a short somewhere, the fuze is on the dedicated power supply, ground wire is bolted up to the trunk with paint stripped of course
 
Last edited:
battery is fine, started right up when i took the power cable out of the fuze which is weird not sure if i have a short somewhere, the fuze is on the dedicated power supply, ground wire is bolted up to the trunk with paint stripped of course
Try another fuse first, then fuse and fuse holder??? Haven't heard of a similar situation before. Let us know how you solved the issue. Good luck.
 
Last edited:
Try another fuse first, then fuse and fuse holder??? Haven't heard of a similar situation before. Let us know how you solved the issue. Good luck.
so basically i didnt check all my wires, ground was touching the batt wire on the amp and was shorting out surprisingly nothing blew but the 15” is bangin now
 
Activity
No one is currently typing a reply...

Similar threads

The wiring harness adapter is less than $10 online. It makes everything 10x easier. You just wire your new stereo to the adapter outside of the...
3
51
Ive doubled up 12 ga many times for sub wiring.. even 14 ga for speaker wiring. Its OFC and it should do great and save you some money since you...
7
461
My brain hurts just looking at those diagrams. It's late so if anyone sees a problem with either of those, please feel free to chime in!
8
510
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
571
Yup , the dsp should have input sections, it may have one for sub? Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
2
500

About this thread

dymeone

CarAudio.com Newbie
Thread starter
dymeone
Joined
Location
California
Start date
Participants
Who Replied
Replies
7
Views
1,009
Last reply date
Last reply from
metalheadjoe
Buick Amp Connector.JPG

maylar

    Jun 2, 2024
  • 0
  • 0
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0

New threads

Top